2016年2月24日星期三

Soil PH Tester

Four in One function:  Soil temperature meter / PH meter / Soil moisture meter / Light intensity meter.   

Electronic digital soil analyzer is the latest speed measuring devices, it mainly test soil pH, moisture, humidity, temperature and light intensity plants,
using a 9V carbon-zinc batteries, simple operation, probe length 200mm.The instrument parameters measured by the liquid crystal display. This instrument also has a battery low indicator and auto power off function (5 minutes automatic shut down is not used.) It saves time and effort, and high efficiency. The instrument is suitable for planting flowers and grass, landscaping.

Product size: 122mm * 36mm * 63mm
Operating:
Please install the batteries before use, remove the probe protective cover.

light measurement:
A. Press the ON button to turn the instrument
B. Align the highest point of the light source sensor window.
C. The current intensity of light will be displayed on the LCD monitor.

 sunlight (9 levels)LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH+
Test rangemoiosture(5 levels) DRY+, DRY, NOR, WET, WET+
 PH value(12 levels) 3.5~9.0 pH (display resolution 0.5)
 Temperature ℃-9~50°C (16~122°F)

Tips: Do not block light or light sensors to create shadows.
PH range of measurement:
A. Press the【PH / TEMP】button on the back of the PH value of the location
B. the probe vertically into the soil, the need for testingas soon as possible. Do not probe too deep insertion of the side damage plant roots.
C.Press the【ON】button to start the measurement.
D. The PH value test will be displayed on the LCD screen.
E. more than a few times come to the exact measurement value.

Tips:
vertical insertion probe, in the middle of the edge of the plant stem.
Gently push the soil survey in order to avoid damage to the probe.
If the measurement of the soils too dry or too fertile can not accurately measure the PH value, the user can sprinkle a little water, then measure it again in 
half an hour

Moisture measurement:
A. Press the【PH / TEMP】button in the back of the instrument TEMP
B. vertically into the soil as much as possible. Do not probe too deep insertion of the side damage plant roots.
C. Press the【ON】button to start themeasurement.
D. Testing of soil moisture values ​​will be displayed on the LCD screen.
E. more than a few times comes to the exact measurement value.

Temperature measurement:
A. When measuring humidity at the same time, soil temperature will also be displayed on the LCD screen.
B. Press【℃ / ℉ OFF】button to set the temperature display is ℃ or ℉.

Tips: 
If the user not to probe into the soil, then shows the exact temperature of the external space environment.

没有评论:

发表评论